Agriculture Super Spreading Surfactant Polyether Polydimethylsiloxane Ethoxylate Trisiloxane
SiRS-2677 is a super spreading surfactant based on trisiloxane ethoxylate. It lowers the aqueous surface tension of spay solutions. Typically, SiRS-2677 spay adjuvant ( @ 0.1% wt%) gives the aqueous surface tension lower than 21.0 mN/m, which is much better than conventional adjuvant.
Product Data
| Item |
Value |
| Appearance |
Colorless to amber clear liquid |
| Viscosity, 25ºC, mm2/s |
15-25 |
| Active Content,% |
100 |
| Surface tension, mN/m, 0.1% |
<21 |
| Density, g/cm3 |
1.01-1.03 |
| Solubility |
Dissolved in water |
| Cloud point, ºC,1%, wt |
<10 |
Notes: these data are for reference only and should not be used as preparation specifications.
Application
Formulation for agrochemicals:
SiRS-2677 can be used as a component of 0.5~8% wt in agrochemical formulations. Adjust the formulations PH value around 6.5~7.5 ( since it may hydrolysis under acid or alkaline conditions). In order to achieve the most cost-effective solution, trial test is recommended before use.
The tank-mix:
As a tank mix additive, SiRS-2677 can increase spray coverage and promote absorption. Adjust the formulations PH value 6-8, and used up within 24 hours since formulated.Typically , 5g SiRS-2677 is recommended for every 20KG spray liquid, mix and stir well before use.
Typical usage proportion is as follows:
| Application |
Dosage, wt% |
| Plant Growth Regulator |
0.025-0.05% |
| Herbicide |
0.025-0.15% |
| Pesticides |
0.025-0.1% |
| Antiseptic |
0.015-0.05% |
| Fertilizers and trace elements |
0.015-0.1% |
About silicone super spreader
Agricultural silicone spreading and penetrating agent is a kind of silicone surfactant with super spreading ability. It makes the water surface tension lower down to the 21mN/m at the concentration of 0.1% (wt.), after the mixture with the pesticide solution in a certain proportion, it can lower the contact angle between the spray and foliage, which can enlarge the coverage of the spray. Furthermore, it can promote the pesticide absorbed through the stomatal of leaves, which is extremely effective for improving efficacy, reducing amount of pesticide, saving cost, reducing environmental pollution caused by pesticides.
The Characteristic of High Performance Agrosilicone surfactant:
• Superwetting and penetration.
• Reduce surface tension significantly, and lower contact angel of agrochemical fluid to crop.
• Improve spray coverage of agrochemicals on crop.
• Promote rapid uptake of agrochemical into plant tissues.
• Make agrochemical fluid more efficient, reduce usage by 30-50%.
• Environment friendly
What silicone super spreader can Sunoit offer ?
Use Guide
1. Used of spray mixed in drum
In general, add Agricultural silicone spreading and penetrating agent (4000 times) of 5g in every 20kg spray. If it needs to promote the absorption of systemic pesticide, increase the function of pesticide or reduce the amount of spray further, it should add the usage amount properly. In general, the amount is as follows: Plant promote regulator: 0.025-0.05%, Herbicide: 0.025-0.15%, Insecticide: 0.025-0.1%, Fungicide: 0.015-0.05%, Fertilizer and trace element: 0.015-0.1%. When using, dissolve the pesticide first, add RH-208 after the uniform mixture of 80% water, then add water to 100% and mix them uniformly. It is advised that when using Agricultural Silicone Spreading and Penetrating Agent, the water amount reduced to be 1/2 of the normal (suggested) or 2/3, average pesticide usage reduced to be 70-80% of the normal. Using the small aperture nozzle will quicken the spray speed.
2. Used of Original Pesticide
When the product added into the pesticide formulation, we suggest the amount of 0.5-8% of pesticide formulation. Adjust the pH value of the pesticide formulation to 6-8. The user should adjust the amount of Agricultural Silicone Spreading and Penetrat- ing Agent according to different kinds of pesticide varieties and formulations to reach the most effective and most economical result. Do compatibility tests and step tests before usage.
ABOUT SUNOIT
Jiangshan Sunoit Performance Material Science Co.,Ltd, branded as SUNOIT™, is a young and dynamic corporation which supplies and produces specialty chemicals and provides technical solutions since 2018. The products from Sunoit conclude siliconate, silicone fluid, modified silicone, silicone emulsion, silicone resins and fluorochemicals. Today, Sunoit is developing into a technology-based company integrating manufacturing, trading and R&D. We work with more than 200 clients worldwide in different markets including construction, textile & fabrics, personal care & cosmetics, agricultural chemicals, polyurethane industry, lubricants and additives, etc. The materials from Sunoit are extensively tested with the highest standards to meet with diverse demands. Sunoit is your reliable global partner providing tailor-made specialty chemicals and services for a better future.
WORKSHOP
CERTIFICATIONS
WORK WITH US
WHY CHOOSE US
Audited Supplier 
){kind=link}