Non-Ionic Supers Preader Sirs-2686 Spay Adjuvant

• Customization: Available
• CAS No.: 134180-76-0
• Certification: REACH
• Model NO.: SiRS-2686
• Appearance: Liquid
• Color: Colorless to Amber Transparent Liquid
• Application: Supers Preader
• Ionic Type: Non-Ionic
• Water Solubility: Soluble
• Transport Package: Drum or IBC
• Specification: 100% active content
• Trademark: SUNOIT
• Origin: China
• HS Code: 391000000
• Production Capacity: 1000mt

Product Description

SiRS-2686 is a super spreading surfactant based on trisiloxane ethoxylate. The SiRS-2686 spray adjuvant lowers the aqueous surface tension of spay solutions. Typically, SiRS-2686 spay adjuvant ( @ 0.1% wt%) gives the aqueous surface tension lower than 21 mN/m. It efficiently decreases contact angle between spray liquid and leafs, increases the covering area and promote the agrochemicals absorption.

Features
• Low foaming
• Low pour point for low temperature applications.

Product Data

Item	Value
Appearance	Colorless to amber transparent liquid
Viscosity, 25ºC, mm^2/s	25-45
Active Content,%	100
Surface tension,mN/m,0.1%, wt	21
Density, g/cm^3	1.01-1.03
Cloud point,ºC, (1%, wt)	Lower than 10

Notes: these data are for reference only and should not be used as preparation specifications.

Application
Used as spray adjuvant
SiRS-2686 can increase the coverage of the spraying agent, promote the uptake and decrease the dosage of the spraying agent.Typical proportion as following:

Application	Dosage, wt%
Plant Growth Regulator	0.025-0.05%
Herbicide	0.025-0.15%
Pesticide	0.025-0.1%
Bactericide	0.015-0.05%
Fertilizer and trace element	0.015-0.1%

Firstly dissolve the pesticide, add SiRS-2686 after the uniform mixture of 80% water, then add water to 100% and mix well The water amount is suggested to be reduced to 1/2 or 2/3 of the normal amount , average pesticide usage reduced to 70-80% of the normal amount. A small aperture nozzle is helpful with the spray speed.

Used in agrochemical formulations:
SiRS-2686 can be added in the original pesticide.
When added to the original pesticide, suggested rate 0.5%-8% of the original pesticide. Adjust the pH of pesticide prescription to 6-8. The amount is flexible to adjust for different kinds of pesticide and prescription. Prior compatibility test and stepwise test is necessary to determine optimum dosage.
 

ABOUT SILICONE SUPER SPREADER

Agricultural silicone spreading and penetrating agent is a kind of silicone surfactant with super spreading ability. It makes the water surface tension lower down to the 21mN/m at the concentration of 0.1% (wt.), after the mixture with the pesticide solution in a certain proportion, it can lower the contact angle between the spray and foliage, which can enlarge the coverage of the spray. Furthermore, it can promote the pesticide absorbed through the stomatal of leaves, which is extremely effective for improving efficacy, reducing amount of pesticide, saving cost, reducing environmental pollution caused by pesticides.
 

The Characteristic of High Performance Agrosilicone surfactant:
 

• Superwetting and penetration.

• Reduce surface tension significantly, and lower contact angel of agrochemical fluid to crop.

• Improve spray coverage of agrochemicals on crop.

• Promote rapid uptake of agrochemical into plant tissues.

• Make agrochemical fluid more efficient, reduce usage by 30-50%.

• Environment friendly

What silicone super spreader can Sunoit offer ?

 

Use Guide

1.  Used of spray mixed in drum

In general, add Agricultural silicone spreading and penetrating agent (4000 times) of 5g in every 20kg spray. If it needs to promote the absorption of systemic pesticide, increase the function of pesticide or reduce the amount of spray further, it should add the usage amount properly. In general, the amount is as follows: Plant promote regulator: 0.025-0.05%, Herbicide: 0.025-0.15%, Insecticide: 0.025-0.1%, Fungicide: 0.015-0.05%, Fertilizer and trace element: 0.015-0.1%. When using, dissolve the pesticide first, add RH-208 after the uniform mixture of 80% water, then add water to 100% and mix them uniformly. It is advised that when using Agricultural Silicone Spreading and Penetrating Agent, the water amount reduced to be 1/2 of the normal (suggested) or 2/3, average pesticide usage reduced to be 70-80% of the normal. Using the small aperture nozzle will quicken the spray speed.
 

2. Used of Original Pesticide

When the product added into the pesticide formulation, we suggest the amount of 0.5-8% of pesticide formulation. Adjust the pH value of the pesticide formulation to 6-8. The user should adjust the amount of Agricultural Silicone Spreading and Penetrat- ing Agent according to different kinds of pesticide varieties and formulations to reach the most effective and most economical result. Do compatibility tests and step tests before usage.
 

 

 

ABOUT SUNOIT

Jiangshan Sunoit Performance Material Science Co.,Ltd, branded as SUNOIT™, is a young and dynamic corporation which supplies and produces specialty chemicals and provides technical solutions since 2018. The products from Sunoit conclude siliconate, silicone fluid, modified silicone, silicone emulsion, silicone resins and fluorochemicals. Today, Sunoit is developing into a technology-based company integrating manufacturing, trading and R&D. We work with more than 200 clients worldwide in different markets including construction, textile & fabrics, personal care & cosmetics, agricultural chemicals, polyurethane industry, lubricants and additives, etc. The materials from Sunoit are extensively tested with the highest standards to meet with diverse demands. Sunoit is your reliable global partner providing tailor-made specialty chemicals and services for a better future.

WORKSHOP

CERTIFICATIONS

WORK WITH US

WHY CHOOSE US